Stone Honeycomb Panels

We provide Honeycomb Panels to these regions: USA | UK | Canada | Australia | Germany | Europe | Singapore | Hong Kong | Asia


Stone Honeycomb Panels — Key Facts

Manufacturer: Foshan Liming Honeycomb Composites Co., Ltd. (HYCOMB®), Foshan, Guangdong, China — we produce both the honeycomb core and the finished panel in one factory, since 2000 (26 years).

  • Capacity: 10 honeycomb core lines and 3 continuous panel lamination lines, including one of the widest in the industry. Annual output: 10,000,000 m² of honeycomb core, 3,000,000 m² of aluminium honeycomb panels and 300,000 m² of stone & porcelain honeycomb panels.
  • Panel build-up: 3–8 mm natural stone veneer bonded to an aluminium honeycomb core (alloy 3003) with structural epoxy and a thermoplastic film.
  • Maximum panel size: up to 1600 × 3200 mm for stone and porcelain (sintered slab) panels; all-aluminium honeycomb panels up to 2000 × 6000 mm; curved (single/double-curvature) panels on request.
  • Weight: typically 15–25 kg/m² — around two-thirds lighter than an equivalent solid stone slab.
  • Fire performance: a 39 mm stone honeycomb composite panel is classified A2-s1,d0 to EN 13501-1:2018 (SGS-CSTC report SDFS2002000643FF); BS 476-6 and BS 476-7 reports also available. This classification applies to the tested build-up only.
  • Third-party tested: PSB, ASTM, SGS and MA test reports; US Miami-Dade NOA; Middle-East WH certification (5 countries); ISO 9001 / ISO 14001 / ISO 45001.

Specifications at a glance

Property Specification
Stone veneer 3–8 mm marble, granite, travertine, limestone or onyx (also sintered porcelain)
Core Aluminium honeycomb, alloy 3003, foil 0.035–0.078 mm, cell 4–10 mm
Panel thickness 10 / 15 / 20 / 25 mm (custom available)
Panel size Up to 1600 × 3200 mm (stone / porcelain); up to 2000 × 6000 mm (all-aluminium)
Panel weight 15–25 kg/m² (build-up dependent)
Rear skin Aluminium 0.5 / 1.0 / 2.5 mm, or fibreglass
Fire classification 39 mm stone honeycomb composite panel: EN 13501-1:2018 A2-s1,d0 (SGS-CSTC report SDFS2002000643FF); BS 476-6 / BS 476-7 tested. Applies to the tested build-up only.
Weathering Freeze–thaw cycling (ASTM C297 / BS EN 12371) and 600 h neutral salt spray — no cracking or delamination
Applications Ventilated and sealed facades, curtain wall infill, columns and soffits, lift interiors, interiors, table tops

advantages of honeycomb panels

HyCOMB’s honeycomb slate combines natural stone veneers with fiberglass or aluminum honeycomb linings for reinforcement. It is a revolutionary application of exterior cladding and interior decoration, with many unparalleled advantages:

  • light weight; the overall weight is reduced by 2/3 compared to the size stone
  • rigid and sturdy; provides 60 times greater resistance on impact
  • easy to install; the patented fast installation system triples the installation speed and passes the hurricane wind loading test
  • practical and affordable; a single piece of stone cladding with a maximum size of 1600 x 3200mm significantly reduces labor costs
  • sound insulation and insulation; insulation and sound insulation for increased energy efficiency and comfort
  • anti-corrosion; long-lasting rust and corrosion resistance
  • weather resistance; designed to handle extreme temperatures – resistance to elements
  • environmental protection
  • waterproof; waterproofing makes our stone cladding ideal for interior, exterior and veneer applications
  • fire cladding solution: non-flammable
  • efficient; i insulation and soundproofing for peace and comfort

Our stone honeycomb panels are typically made up of 1MM aluminum backs, 17mm honeycomb, 1mm fiberglass or aluminum and 6mm stone, which can be straight or curved to your specifications.

stone veneer honeycomb panel with its unique advantages, better to achieve the design intent, saving a lot of material costs and installation time.

stone hive solutions for all tastes

HyCOMB panels offer a wide range of finishes for stone honeycomb panels around the world for all projects. The stone cladding materials we have selected include the following surfaces:

  • marbled
  • granite
  • limestone
  • sandstone
  • travertine
  • onyx
  • brick

curved stone layer

HyCOMB’s ultra-thin curved stone honeycomb panel is a patented product and innovative cladding solution that offers all the benefits of our regular stone honeycomb panels in addition to the following:

  • minimum curvature: radius 500mm, brittle stone up to 1000mm
  • curvature: inward and outward
  • note that the environmental protection cladding; significantly reduce waste during the production of curved panels
  • enhanced rigidity; the impact strength is 60 times stronger
  • large-format; the maximum and minimum size depends on your design

Hycomb’s surface stone honeycomb provides more flexibility to support design intent and saves significant material costs and installation time than other methods of making surface stone panels.

White onyx stone honeycomb panel — natural onyx veneer laminated on an aluminium honeycomb core
HyCOMB's curved stone honeycomb panel

Certificates & Accreditations

British Standard Logo - British Fire Standard
TUV SUD Logo
International Organization for Standardization (ISO) logo
Warnock Hersey mark
HYCOMB aluminium honeycomb panel Miami-Dade NOA (HVHZ) certification for facade cladding
ASTM International vector logo
CNAS logo
IAF Logo

Why HyCOMB Stone Honeycomb Panels?

Our customised epoxy adhesive is supplied by a world-renowned adhesive brand within the construction industry, all of which helps us to produce lightweight stone cladding with far superior strength compared to traditional alternatives. 

Durability and weather resistance are the major concerns addressed by stone honeycomb, with the adhesive selected playing a key role in the lifespan of the panels.

Working in close partnership with our industry-leading supplier, our exclusive epoxy adhesive has been tailor-made specifically for the lamination of our stone wall panels with our special aluminium/fiberglass honeycomb backing.

The application process entails working closely with the adhesive supplier with detailed guidelines that are strictly followed during the production process of our stone honeycomb panels.

Testing & Durability 

We conduct comprehensive, accelerated aging testing to ensure long-lasting quality and endurance in scientifically-replicated, authentic weather conditions in partnership with the reputable testing company, SGS.

This involves exposing the panels to extreme temperatures which start at -40c and rise to 80c before dropping back to -40c again in a single cycle. Panels are subject to a total of 60 cycles as a minimum. Additionally, HyCOMB Panels has achieved the below certificates and accreditations.

Frequently Asked Questions

How much lighter is a stone honeycomb panel than solid stone?

Around two-thirds lighter. A stone honeycomb panel weighs roughly 15–25 kg/m², against 40–60 kg/m² for an equivalent 20–30 mm solid stone slab — which reduces sub-frame loading and speeds up installation.

What is the maximum panel size?

Up to 1600 × 3200 mm for stone and porcelain honeycomb panels in a single panel; all-aluminium honeycomb panels are produced up to 2000 × 6000 mm. The achievable maximum depends on stone type and build-up — please send your drawing for a check. For facades and curtain walls, see stone honeycomb panels for building facades.

Are stone honeycomb panels fire rated?

A 39 mm stone honeycomb composite panel is classified A2-s1,d0 to EN 13501-1:2018 (SGS-CSTC report SDFS2002000643FF); BS 476-6 and BS 476-7 reports are also available. This is a classification report for that build-up, not a certification covering every stone panel thickness or every HYCOMB product. Aluminium honeycomb panels are covered by a separate GB 8624-2006 report (202110132). Tell us your build-up and we will confirm which report applies.

Can the panels be curved or bent?

Yes — single- and double-curvature panels are produced with a flexible stone veneer on a shaped honeycomb core, and are commonly used for columns, curved soffits and lift interiors.

Which stone types are available?

Marble, granite, travertine, limestone, onyx and sintered porcelain. We can laminate stone supplied by you, or source it through our stone suppliers.

How do I request a quotation?

Send your drawings, stone type, quantity and delivery location to z.ou@hycomb.com.cn or intl@hycomb.com.cn — we will reply with panel build-up, specification and price.



HyCOMB's curved stone honeycomb panels applied for a structural column column
Huntsman logo


Stone honeycomb panels — specification summary

Stone honeycomb panels are composite cladding panels made by bonding a thin natural stone face to an aluminium honeycomb core and a backing skin. HYCOMB® manufactures them in Foshan, China, up to 1600 × 3200 mm. They keep the appearance of solid stone at a fraction of its weight for facades, interiors and large-format cladding.

Manufacturer Foshan Liming Honeycomb Composites Co., Ltd. (HYCOMB®), Foshan, Guangdong, China
Panel construction Natural stone face + aluminium honeycomb core + backing skin
Maximum panel size — stone / sintered stone honeycomb panel 1600 × 3200 mm
Fire evidence EN 13501-1:2018 A2-s1,d0 classification report SDFS2002000643FF (SGS-CSTC, Shunde), 2020-03-11 — applies to the 39 mm stone honeycomb composite panel only
Scope limit A classification report is not a product certification or type approval, and does not transfer to another build-up
Company standards work Participating drafting organisation for JG/T 334-2012, JC/T 2113-2012 and JG/T 328-2011

When to specify, and when not to

Specify stone honeycomb panels where a natural stone finish is required but the substrate, fixing system or transport budget cannot carry the weight of solid stone. For a uniform, non-natural surface, a porcelain / sintered stone honeycomb panel is usually the better match. Always confirm the panel build-up against the project fire specification before specifying.

Test evidence and its scope

Two third-party classification reports are referenced on this site, and they apply to different products: report SDFS2002000643FF (SGS-CSTC Shunde, 2020-03-11) classifies a 39 mm stone honeycomb composite panel as A2-s1,d0 to EN 13501-1:2018; report 202110132 classifies a 15 mm aluminium honeycomb composite panel as A2-s1,d0,t0 to GB 8624-2006. These are classification reports for the tested build-ups, not certifications covering a product family.

Questions specifiers ask

Is the EN 13501-1 A2-s1,d0 classification valid for every stone honeycomb panel?
No. Report SDFS2002000643FF covers the 39 mm stone honeycomb composite panel that was tested. A classification does not automatically transfer to another thickness, face material or build-up. Ask us for the report that matches your specification.

What is the largest stone honeycomb panel you can make?
1600 × 3200 mm for stone and sintered stone honeycomb panels. Aluminium honeycomb panels have a different maximum of 2000 × 6000 mm.

Are you the manufacturer or a trading company?
We are the manufacturer: Foshan Liming Honeycomb Composites Co., Ltd., based in Foshan, Guangdong, China, producing honeycomb core and laminated panels since 2000. See About HYCOMB for the legal name and factory address.

More detail: About HYCOMB · Industry standards we helped draft · Certifications & test reports · Product overview · Author profile